The standard CEI  61000 entitled electromagnetic Compatibilité (CEM) is one of the bulky publications of CEI.

Certain parts were made compulsory from there in the European Union by the Directive 89/336/CEE , revised 2004/108/CE , under name IN   61000 , then, according to the rule, retranscribed in the national rights under names such as BS   EN  61000 with the the United Kingdom, NF   EN  61000 in France, etc

The application of these directives is obligatory to profit from the Marquage THIS and thus to have the right to market the products concerned in the European Union.

Contents of the CEI 61000

Notes:
  • = report
  • = technical specification
  • the official titles are noted in Italic . The version French E was selected each time it existed, if not it is the version English E which is quoted, with a “free” translation in lower part.

Part 1: General information

  • 1-1 Application and interpretation of definitions and the fundamental
  • 1-2 Methodology for the realization of the functional safety of electrical materials and electronic terms from the point of view of the electromagnetic phenomena *1-3 Effects of the electromagnetic impulses with high-altitude (IEM-HA) on the materials and systems civil
  • 1-4 Historical rationale for the limitation off power-frequency conducted harmonic current emissions from equipment, in the frequency arranges up to 2 Khz
(Reasons historical for the limitation of the Harmonique S led to industrial frequency emitted by the equipment, until 2  Khz)
  • 1-5 civil High power (HPEM) electromagnetic effects one systems
(Effects electromagnetic S high power on the civil systems)

Part 2: Environment

  • 2-1 Description of the environment - Environment electromagnetic for the disturbances led low frequency and the transmission of signals on the public networks of food *2-2 Levels of compatibility for the low frequency disturbances led and the transmission of the signals on the public networks of food low tension
  • 2-3 Description of the environment - Phenomena radiated and led to frequencies other than that of the network *2-4 Levels of compatibility in the industrial facilities for the led disturbances low frequency
  • 2-5 Classification of the electromagnetic environments - fundamental Publication in CEM
  • 2-6 Evaluation of the levels of emission in the food of the industrial power stations taking account of the disturbances led low frequency
  • 2-7 Magnetic fields low frequency in various environments
  • 2-8 Hollow of tension and short cuts on the public networks of electricity including of the statistical results of measurement
  • 2-9 Description of environment IEMN-HA - radiated Disturbances - fundamental Publication in CEM
  • 2-10 Description of environment IEMN-HA - led Disturbances
  • 2-11 Classification of environment IEMN-HA
  • 2-12 Levels of compatibility for the low frequency disturbances led and the transmission of the signals on the public networks of Medium Average food
  • 2-13 High-power electromagnetic (HPEM) environments - Radiated and conducted
(electromagnetic Environments high power - Radiated and led)

Part 3: Limits

  • 3-2 Limiting for the emissions of Harmonic current (running called by the apparatuses ≤16 has by phase) (more two amendments). See also CEI 60555 -2.
  • 3-3 Limitation of the variations of tension, the fluctuations of tension and flicker in the public networks of food low tension, for the materials having a current assigned ≤16 has by phase and not subjected to a conditional connection (more one amendment)
  • 3-4 Limitation of the emissions of harmonic currents in the networks low tension for the materials having an assigned current higher than 16 has *3-5 Limitation of the fluctuations of tension and the Flicker in the networks low tension for the equipment having a current called superior with 16  With *3-6 Evaluation of the limits of emission for the deforming loads connected to the MT networks and HT - fundamental Publication in CEM *3-7 Evaluation of the limits of emission of the fluctuating loads on networks MT and HT - fundamental Publication in CEM *3-8 Transmission of signals in electrical installations with low tension - Levels of emission, wavebands and levels of electromagnetic disturbances
  • 3-11 Limitation of the variations of tension, the fluctuations of tension and flicker in the public networks of food low tension - Equipment having a current called ≤75 has and subjected to a conditional connection
  • 3-12 Limites for the harmonic currents produced by the apparatuses connected to the public networks low tension having a current called >16 has and ≤75 has by phase

Part 4: Techniques of test and measurement

  • 4-1 Overall picture of series CEI 61000-4
  • 4-2 Test of immunity to the electrostatic discharges (more two amendments)
  • 4-3 Test of immunity to the electromagnetic fields radiated at the radioelectric frequencies (more one amendment)
  • 4-4 Tests of immunity to the fast electric transients in salvos
  • 4-5 Test of immunity to the shock waves (more one amendment)
  • 4-6 Immunity with the led disturbances, induced by the radioelectric fields (more one amendment)
  • 4-7 general Guide relating to measurements of harmonics and interharmonic, like with the measuring equipment, applicable to the feeder systems and the apparatuses which are connected there
  • 4-8 Essai of immunity to the magnetic field at the frequency of the network (more one amendment)
  • 4-9 Essai of immunity to the impulse magnetic field (more one amendment)
  • 4-10 Essai of immunity to the oscillatory magnetic field deadened (more one amendment)
  • 4-11 Essais of immunity to the hollows of tension, short cuts and variations of tension
  • 4-12 Essai of immunity to the oscillatory waves (more one amendment)
  • 4-13 Essais of immunity low frequency to the harmonics and inter-harmonics including the transmitted signals on the alternative electrical communication
  • 4-14 Test of immunity to the fluctuations of tension (more one amendment)
  • 4-15 Flickermètre - functional Specifications and of design (more one amendment)
  • 4-16 Test of immunity to the disturbances led in mode common in the frequency band of 0 Hz to 150 Khz (more one amendment)
  • 4-17 Test of immunity to the residual undulation on entry of power to D.C. current (more one amendment)
  • 4-20 Tests of emission and immunity in the guides of wave TEM
  • 4-21 Testing methods in reverberating room
  • 4-23 Testing methods for the safety devices for radiated disturbances IEMN-HA and other disturbances
  • 4-24 Testing methods for the safety devices for disturbances led IEMN-HA
  • 4-25 Testing methods of immunity to the IEMN-HA of the apparatuses and the systems
  • 4-27 Test of immunity to imbalances
  • 4-28 Test of immunity to the variation of the frequency of food
  • 4-29 Tests of immunity to the hollows of tension, short cuts and variations of tension on the accesses of supply D.C. current
  • 4-30 Methods of measurement of the quality of the food
  • 4-32 Compendium of the electromagnetic simulators of impulses to high-altitude (IEMN-HA) (contained in English only)
  • 4-33 Measurement methods for high-power transient parameters
(methods of measurements of the parameters of the transients of strong power)

Part 5: Guides of installation and attenuation

  • 5-1 general Considerations *5-2 Put at the ground and wiring *5-3 Concepts of protection IEMN-HA *5-4 Specification of the devices safety against radiated disturbances IEM-HA - fundamental Publication in CEM *5-5 Specification of the safety devices for led disturbances IEMN-HA - fundamental Publication in CEM
  • 5-6 Attenuation of the external electromagnetic influences
  • 5-7 Degrees of protection gotten by the envelopes against the electromagnetic disturbances (Code EM)

Part 6: Generic standards

  • 6-1 Immunity for the residential, commercial environments and of light industry
  • 6-2 Immunity for the industrial environments
  • 6-4 Standard on the emission for the industrial environments
  • 6-5 Immunity for the environments of powerplants and stations *6-6 Immunity against the IEMN-HA for the apparatuses located inside the buildings

See too

  • electromagnetic Compatibility
  • IEC webstore (free previsualisation of the first pages of each section)
  • Directive 2004/108/CE of the European Parliament and the council on europa.eu.int
  • electromagnetic Compatibility of the electricals appliance and electronic on europa.eu.int

Random links:Hen-the-Écharmeaux | Guillaume Gallienne | The Calédoniennes News | Military decoration | Jacques Mazoyhie